ID: 5202
Advertentie ID: #5202 is toegevoegd aan uw verlanglijst.
C- Audio GB202 power amplifier
€125,00
Geen aanbiedingen geplaatst
Omschrijving
Zie overige advertenties voor IMG Stageline ULM 164 6-kanaals mixer
Some tech stuff here for the whole GB range.
Benefits of the GB Series
Simple reliable design
Heavy duty PSU incorporating oversized Toroidal transformer
Clip Limiter and Subsonic Filters
Efficient Forced Air Cooling System
All Aspect Protection Circuitry
Electronically Balanced inputs
Extended Capability via AMPSAP Protocol
GB202
Into 8 Ohms 145W Into 4 Ohms 200W Into 2 Ohms 250W
Power Ratings
The GB Series breaks new ground in affordable power. Primarily intended as a competitively priced, reliable and powerful work horse for the musical instrument market, the GB Series has quickly established itself as a must have amongst touring musicians. Such is the quality and practicality of the range that it has also found favour amongst a wide range of users including discos, clubs, bars, venues, theatre installers and cinema sound specifiers.
The implementation of the AMPSAP protocol means that sophisticated internally fitted system controllers are available to drive active loudspeaker systems.
The GB Series may be bridged externally for higher power mono operation.
Cost-effective high performance power amplifiers
Technical Specifications
Power Ratings GB202 GB402 GB602 Measured per channel, both channels driven at 1kHz to no more than 0.1% THD+N 8 Ohms 145Wrms 260Wrms 370Wrms 4 Ohms 200Wrms 400Wrms 600Wrms 2 Ohms 250Wrms 570Wrms 840Wrms Note: 2 Ohm capability is thermally limited Bridged Mono 8 Ohms 400Wrms 800Wrms 1200Wrms Measured per channel, both channels driven at 1kHz to no more than 1% THD+N 8 Ohms 155Wrms 275Wrms 400Wrms 4 Ohms 225Wrms 445Wrms 670Wrms 2 Ohms 260Wrms 610Wrms 880Wrms Note: 2 Ohm capability is thermally limited
Sensitivity 0.725Vrms 1.025Vrms 1.26Vrms (for full rated power at 4 Ohms)
Frequency Resp. 10Hz-40kHz, +0/-1dB
Damping Factor >200 (ref. 8 Ohms)
Hum and Noise -100dB (ref. rated 4 Ohm power, 20-20kHz)
Channel Separation 60dB at 1kHz
Slew Rate 17V per microsecond
Rise Time 5 microseconds
Input Impedance 20 kOhm balanced
Input Connectors Female XLR & Male parallel out (pin2 Hot)
Subsonic filters 12dB/oct, 30Hz/15Hz/OFF
Clip Limiter Linear Optocoupler
Output Connectors Tamper Proof Binding posts
Output Circuit Type Bipolar Class AB
Power Requirement 100-120 or 220-240Vac±20% 50/60Hz
Weight - Net 13Kg 14Kg 15Kg 30lbs 31lbs 33lbs Shipping - Gross 17Kg 18Kg 19Kg 37lb 38lbs 42lbs
Dimensions 483mm x 320mm x 133mm (3U) 19in x 12.6in x 5.25in (3 rack units)
Some tech stuff here for the whole GB range.
Benefits of the GB Series
Simple reliable design
Heavy duty PSU incorporating oversized Toroidal transformer
Clip Limiter and Subsonic Filters
Efficient Forced Air Cooling System
All Aspect Protection Circuitry
Electronically Balanced inputs
Extended Capability via AMPSAP Protocol
GB202
Into 8 Ohms 145W Into 4 Ohms 200W Into 2 Ohms 250W
Power Ratings
The GB Series breaks new ground in affordable power. Primarily intended as a competitively priced, reliable and powerful work horse for the musical instrument market, the GB Series has quickly established itself as a must have amongst touring musicians. Such is the quality and practicality of the range that it has also found favour amongst a wide range of users including discos, clubs, bars, venues, theatre installers and cinema sound specifiers.
The implementation of the AMPSAP protocol means that sophisticated internally fitted system controllers are available to drive active loudspeaker systems.
The GB Series may be bridged externally for higher power mono operation.
Cost-effective high performance power amplifiers
Technical Specifications
Power Ratings GB202 GB402 GB602 Measured per channel, both channels driven at 1kHz to no more than 0.1% THD+N 8 Ohms 145Wrms 260Wrms 370Wrms 4 Ohms 200Wrms 400Wrms 600Wrms 2 Ohms 250Wrms 570Wrms 840Wrms Note: 2 Ohm capability is thermally limited Bridged Mono 8 Ohms 400Wrms 800Wrms 1200Wrms Measured per channel, both channels driven at 1kHz to no more than 1% THD+N 8 Ohms 155Wrms 275Wrms 400Wrms 4 Ohms 225Wrms 445Wrms 670Wrms 2 Ohms 260Wrms 610Wrms 880Wrms Note: 2 Ohm capability is thermally limited
Sensitivity 0.725Vrms 1.025Vrms 1.26Vrms (for full rated power at 4 Ohms)
Frequency Resp. 10Hz-40kHz, +0/-1dB
Damping Factor >200 (ref. 8 Ohms)
Hum and Noise -100dB (ref. rated 4 Ohm power, 20-20kHz)
Channel Separation 60dB at 1kHz
Slew Rate 17V per microsecond
Rise Time 5 microseconds
Input Impedance 20 kOhm balanced
Input Connectors Female XLR & Male parallel out (pin2 Hot)
Subsonic filters 12dB/oct, 30Hz/15Hz/OFF
Clip Limiter Linear Optocoupler
Output Connectors Tamper Proof Binding posts
Output Circuit Type Bipolar Class AB
Power Requirement 100-120 or 220-240Vac±20% 50/60Hz
Weight - Net 13Kg 14Kg 15Kg 30lbs 31lbs 33lbs Shipping - Gross 17Kg 18Kg 19Kg 37lb 38lbs 42lbs
Dimensions 483mm x 320mm x 133mm (3U) 19in x 12.6in x 5.25in (3 rack units)